Real Elevators Real Elevators Real Elevators {short description of image}
Real Elevators Real Elevators Real Elevators Real Elevators {short description of image}
Real Elevators {short description of image}
Real Elevators
Real Elevators
Real Elevators Real Elevators
Real Elevators
Real Elevators

Automatic Door Lift
Real Elevators
Real Elevators
Real Elevators

Passenger Lift - Automatic Doors
Automatic door are recommended for lifts being used at public buildings handling high traffic. Though they require more space in the building as compared to manual doors, it is advisable to go for automatic doors. There is no need for a lift operator. The door panels can be designed to add to the décor of the building.

The range of lifts available is from 4 persons to 40 persons. The speed of travel ranges from single speed of 0.7m/s to variable speeds of 1.5m/s. The cabin walls & door panels can be of M.S. painted, M.S. Powdercoated or Hairline brush finished stainless steel. Glass doors can also be provided but are expensive. Normally center opening doors are advised due to their ease of use and elegance. However in places with a size constraint, telescopic doors can also be provided in which both the doors open towards one side.

Our lifts use Programmable Logic Controllers with auto fault display and detection capability. Modern amenities like variable speeds through ACVVVF drives, Automatic rescue device for electricity failure, Load weighing devices for large lifts, Hydraulic machine room less lifts, etc are available at extra cost.

request a quote

Notes

Machine Room Height 'M' - 2430
Pit Depth 'P' - 1650
Overhead ( F.F.L. of Highest floor to Machine Room Bottom ) 'O' - 4850

Any number of floors can be served. The Side elevation shows only the Top Floor & Bottom Floor for the respective height requirements :

  • All Door heights will be 2000mm clear.
  • Plan for Manual Swing doors / Collapsible doors / Telescopic doors is different.
  • All Sizes are inside finished dimensions in mm.
  • All Hoistway walls are 230 mm thick Brick or 150 mm RCC walls.

request a quote

Clients Scope

  • Entire Civil Structure for the lift shaft including plaster & painting of lift shaft inside.
  • Three Phase Electric Supply.
  • Scaffolding during Lift erection.
  • Provision of sill support, machine support, Lifting beam / hook, pit ladder, etc.
  • Grouting of our holdfasts, Push button Boxes, Door frame members, etc.
  • Machine room will be extended beyond the lift shaft so that machine is approachable from three sides for maintenance.

Size Table
Person Load Car Inside ‘A’ x ‘B’ Lift Shaft ‘C’ x ‘D’ Entrance ‘E’ Machine Room ‘K’ x ‘L’
No. Kgs. Width x Length Width x Length Width Width x Length
4 272 1100 x 700 1850 x 1350 800 3000 x 3000
6 408 1100 x 1000 1850 x 1650 800 3000 x 3000
8 544 1300 x 1100 1850 x 1750 800 3000 x 3000
10 680 1350 x 1300 2050 x 1950 900 4000 x 3000
13 884 1500 x 1500 2050 x 2150 900 4000 x 3000
16 1088 1750 x 1500 2250 x 2150 1000 4000 x 3600
20 1360 2000 x 1600 2250 x 2250 1000 4500 x 3600
24 1632 2100 x 1800 2450 x 2350 1100 4500 x 3600