Car Lift
Used for multistoried movement of cars &
two wheelers by automobile show rooms, multi-level parking facilities,
rooftop parking, etc.
The main advantage offered by us is the ability to carry vehicles with the
least amount of power. Also, we being leaders in this type of lifts, a wide
range of lifts is on offer to suit every requirement and pocket. The basic
design is a drumwound lift with an open checkered plate platform. Better
efficiency is achieved by the use of a traction machine. The platform can be
covered by very elegant sheet metal panels painted to your shade of choice.
If people too are required to travel in the lift, special devices are used
to make the lifts safer and smooth. Even the gates can be made automatic if
so desired.
These lifts can also be installed in self supporting steel structures even
outside a building. Special lifts can be designed for off-loading vehicles
from multi level delivery trucks.
Notes
| Machine Room Height |
'M' - 2430 |
| Pit Depth |
'P' - 1650 |
| Overhead ( 0.35m/s speed ) |
'O' - 3950 |
| Overhead ( > 0.35 m/s speed ) |
'O' - 4600 |
Any number of floors can be served. The Side elevation shows only the Top
Floor & Bottom Floor for the respective height requirements :
- All Door heights will be as per the table below.
- Door Lintel Bottom should be at plus 150mm above the clear height
mentioned in the table.
- Two side open door is possible at ground floor at the same or
different level.
- Plan for Manual Swing doors / Telescopic doors is different.
- All Sizes are inside finished dimensions in mm.All Hoistway walls
are 230 mm thick Brick or 150 mm RCC walls.
|
Clients Scope
- Entire Civil Structure for the lift shaft including plaster &
painting of lift shaft inside.
- Three Phase Electric Supply.
- Scaffolding during Lift erection.
- Provision of 4 Nos. u-channels (ISMC 300) of length 'C' + 450mm
to be placed above bed plates 12mm thick of size 200mm x 1500mm.
- Provision of sill support, machine support, Lifting beam / hook,
pit ladder, etc.
- Grouting of our holdfasts, Push button Boxes, Door frame members,
etc.
- Machine room will be so constructed that the lift machine is
approachable from three sides for maintenance.
|
| SIZE
TABLE |
| Type and No. of
Vehicles |
Load |
Car Inside ‘A’
x ‘B’ |
Lift Shaft One
side open ‘C’ x ‘D’ |
Lift Shaft Two
side open ‘C’ x ‘D’ |
Entrance ‘E’
x ‘H’ |
| Kgs. |
Width x Length
|
Width x Length |
Width x Length |
Width x Height |
|
| 3 Two wheelers |
500 |
1200 x 2400 |
2000 x 2800 |
2000 x 2480 |
1000 x 2000 |
| 4 Two wheelers |
750 |
1500 x 2400 |
2300 x 2800 |
2300 x 2480 |
1300 x 2000 |
| Small cars |
1,200 |
2300 x 5000 |
3050 x 5250 |
2900 x 5080 |
2100 x 2000 |
| Mid Sized cars |
2,000 |
2400 x 5100 |
3150 x 5350 |
3200 x 5200 |
2200 x 2000 |
| Luxury Cars |
3,000 |
2700 x 5400 |
3450 x 5800 |
3500 x 5500 |
2400 x 2200 |
| S. U. V. |
4,000 |
3000 x 5750 |
3800 x 6050 |
3800 x 5850 |
2400 x 2200 |
| L. C. V. / Bus |
10,000 |
3500 x 7300 |
4400 x 7700 |
4400 x 7400 |
3000 x 3000 |
| Special Purpose |
Custom built sizes for heavy vehicles |
|
|
|
|
|
 |
|
|
|
