Real Elevators Real Elevators Real Elevators {short description of image}
Real Elevators Real Elevators Real Elevators Real Elevators {short description of image}
Real Elevators {short description of image}
Real Elevators
Real Elevators
Real Elevators Real Elevators
Real Elevators
Real Elevators

Dumbwaiters
Real Elevators

Real Elevators
Real Elevators

Small lifts installed in kitchens for transferring cooked hot food, dirty utensils, raw materials, etc. to various pantries at all floors in multistoried hotels, large households, marriage halls, restaurants, etc. Dumbwaiters for kitchens are usually made of stainless steel so that they are not affected by steam, hot food, water, etc.

Dumbwaiters are also used in hospitals and departmental stores to carry stores to various levels in the building. These can be of S.S. or M.S.

The capacity starts from 20 Kgs onwards as desired. Sizes are from 1½' x 1½' to 3' x 3' or even larger as required. Only about 10" extra space is required in the building to fit this lift. Only one wall is required to support the smaller lifts. The entrance can be protected by either a swing window or vertical biparte doors.

request a quote

Notes

Machine Room Height 'M' - 1200
Pit Depth 'P' - 750

  • Pit created virtually above Bottom Floor FFL.
  • Any number of floors can be served. The Side elevation shows only the Top Floor & Bottom Floor.
  • All Sizes are inside finished dimensions in mm.
  • All Hoistway walls are 150 mm thick Brick or RCC walls.
  • Dumbwaiter entrance bottom will be 750 mm above floor level.
  • Size will be 'A' mm wide x 100 + 'H' mm high inside clear.
  • Machine will rest on a Mid Level Slab or Steel section ( in client's scope ).
request a quote

Clients Scope

  • Entire Civil Structure for the lift shaft including plaster & painting of lift shaft inside.
  • Three Phase Electric Supply.
  • Scaffolding during Lift erection.
  • Grouting of our holdfasts, Push button Boxes, Door frame members, etc.
  • Machine room will be of the same size as the lift shaft with full wall opening on at least one side for maintenance.
Note : Lift Shaft sizes shown are for indication.

SIZE TABLE
LOAD CAR INSIDE ‘A’ x ‘B’ x ‘H’ LIFT SHAFT ‘C’ x ‘D’ ENTRANCE ‘E’ x ‘H’
Kgs. Width x Length x Height Width x Length Width x Height
50 600 x 600 x 900 1200 x 725 600 x 900
100 900 x 900 x 1000 1400 x 1125 900 x 1000
200 1000 x 1000 x 1200 1500 x 1125 1000 x 1200