Aquatropy Products
Air Heater
AIR HEATER (HSD/LPG/CNG)
This is a compact, rigid, noiseless & fully automatic Air Heater. Easy to operate even by an unskilled person. The Hot Air Heater/Furnace operates automatically on a pre-set temperature.
CONSTRUCTION FEATURES :- The main constituents of the Air Heater are the casing which consist of Hi density Ceramic fins insulation, the Stainless Steel combustion chamber, Fines steel smoke tube Heat exchanger membrance, fabricated out of CDS Heat Exchange tube SA179 a flue gas outlet, fuel oil burner and ventilation blower.
IMPORTED OIL BURNER & ELECTRICAL COMPONENTS: - The fuel oil burner is a horizontal firing, pressure atomizing, forced draft type burner with direct electric spark ignition. The fuel oil pump with combustion blower is mounted on the burner casing on the front side of the unit. A fuel oil filter is mounted at a convenient position near the pump and is connected to the oil inlet part of the pump.
BENEFITS
- More than 50% saving as compared to Electric heater
- Running cost much lower than Thermic fluid & Steam Heating
- 'AQUATROPY' Hot Air Heater/Furnace is economical at all the levels.
- Low initial cost as compared to Thermic Fluid Heating
- Low operational and maintenance cost
- Depreciation on AQUATROPY Hoi Air Heater/Furnace can be availed in the very first year (As per income tax rules)
- Small models running on single phase are also available
SALIENT FEATURES
- Clean & Critically controllable hot air
- Low temperature models up to 90° C.
- High temperature models up to 150° C.
- Higher temperatures of more than 150°C can also be achieved through re-circulation of air
- Space Saving compact design
- Can easily be installed with existing or new system
- Almost noise free, Pollution Free, Dust Free
| TECHNICAL SPECIFICATION |
| Details |
MODEL |
AAH-25 |
AAD-50 |
AAH-100 |
AAH-200 |
AAH-400 |
AAH-600 |
Heat output capacity |
Kcal/hr |
25,000 |
50,000 |
1,00,000 |
2,00,000 |
4,00,000 |
6,00,000 |
| Kw ~ |
29 |
58 |
116 |
232 |
464 |
696 |
Max hot air temperature |
°C |
|
225 °c |
|
PROCESS AIR FLOW AT STP
(1.2 KG/M3 AIR DENSITY)
|
m3/hr(80°C)
m3/hr(120°C)
m3/hr(150°C) |
1950
1750
1460 |
3500
1950
1460 |
7000
3890
2920 |
14000
7780
5840 |
28000
15560
11680 |
42000
23340
17520 |
| THERMAL EFFICIENCY |
NCV |
92%±2% |
| MAX FUEL CONSUMPTION |
Kg/hr |
2.75 |
5.5 |
11 |
22 |
44 |
66 |
| ELECTRIC SUPPLY 415±6%, 50Hz±3%, 3 Phase, 4 Wire |
| TOTAL ELECTRIC LOAD Kw 1.75 2.5 4 5.6 7.5 9.5 |
| AUTOMATIC ON/OFF OPTIONAL, PLC CONTROL FOR WEEKLY PROGRAMME |
| DIMENSIONS (APPROX) mm |
W
L
H |
900
1000
1500 |
1050
1200
1800 |
1150
1500
2100 |
1250
1850
2600 |
1450
2050
3300 |
1650
2600
3600 |
Note: 1. Fuel oil consumption is based on Nett Calorific of Value (HSD) 10,200 Kacl/Kg & LDO 10,050 Kcal/Kg. we reserve the right change any specification without prior notice
|
